ورقة بحثية
Influence of Residual Stress on Fatigue Design of AISI 304 Stainless Steel = تأثير الإجهاد المختلف على التصميم الكلالي للفولاذ المقاوم للصدأ AISI 304

Singh, L.


 

Influence of Residual Stress on Fatigue Design of AISI 304 Stainless Steel = تأثير الإجهاد المختلف على التصميم الكلالي للفولاذ المقاوم للصدأ AISI 304

Singh, L.

Austenitic stainless steel cannot be hardened by any form of heat treatment, in fact, quenching from 10000C merely softens them. They are usually cold worked to increase the hardness. Shot peening is a cold working process that changes micro-structure as well as residual stress in the surface layer. In the present work, the compressive residual stress and fatigue strength of AISI 304 austenitic stainless steel have been evaluated at various shot peening conditions. The improvement in various mechanical properties such as hardness, damping factors and fatigue strength was noticed. Compressive residual stress induced by shot peening varies with cyclic loading due to relaxation of compressive residual stress field. The consideration of relaxed compressive residual stress field instead of original compressive residual stress field provides reliable fatigue design of components. In this paper, the exact reductions in weight and control of mechanical properties due to shot peening process are discussed.

Austenitic stainless steel cannot be hardened by any form of heat treatment, in fact, quenching from 10000C merely softens them. They are usually cold worked to increase the hardness. Shot peening is a cold working process that changes micro-structure as well as residual stress in the surface layer....

مادة فرعية

المؤلف : Singh, L.

مؤلف مشارك : Khan, Rutba A
Aggarwal, M.L

بيانات النشر : Muscat، Sultanate of Oman : Sultan Qaboos University/ The Journal of Engineering Research، 2011مـ.

التصنيف الموضوعي : العلوم التطبيقية|الهندسة .

المواضيع : Engineering .

Steel .

الهندسة .

الفولاذ .

رقم الطبعة : 1

المصدر : Sultan Qaboos University : Muscat، Sultanate of Oman.

لا توجد تقييمات للمادة